Cutting a side door in the Quonset Hut
0
Posted on November 24, 2016 by
Back when we did the shotcrete on the Quonset hut, we bucked out a side door between the garage and the mudroom. Leaving the Quonset intact was important because we did not want to weaken the Quonset structure before adding the wet concrete load. However, the buck keeping the concrete off this section meant we could cut it out and make a doorway without needing a big concrete saw. Well, now with the mudroom roof on, it is time to punch the door thru the side of the Quonset.
This segment also covers putting the lights up on the front of the garage.
The Video
The Gallery
Starting the cut
Trimming off the section down to the floor.
Hunter and I both working to trim and smooth the edges of the steel
Maker:0x4c,Date:2017-10-7,Ver:4,Lens:Kan03,Act:Lar01,E-ve
The sensor cost about 8$ from Home Depot
The little circle is a sensor that I added to this light by drilling a hole.
The lights are carriage house style.
This is about as early in the evening as the sensor turns on the lights
The new lights on the garage